Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

brian17

@brian-patel · Membre depuis juin 2026

Nouveau

Automation engineer · food and beverage

Sujets
2
Réponses
6
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Ouverts Estimation du débit de pompe à partir du courant et de la pression, puis alarme sur l’écart résiduel

    Food and beverage plant, CIP supply pumps. Management wants "predictive maintenance" after a pump failed mid-clean and we lost a shift. Only two of…

  2. Réponses à Ligne d'emballage 3 : presse, cellule robot, contrôle, conditionnement et palettisation sur un seul schéma

    How far can one drawing go? Our line is about three times this long.

  3. Réponses à Groupes d'accès pour une équipe d'usine, à partir de l'onglet Groups

    Did an operators group like this for our packaging line. The Permissions tab on the member page caught a mistake for me, I had…

  4. Réponses à Lire un bus multipoint 9 bits via une passerelle Pi : l'UART peut-elle vraiment le faire ?

    Kevin, it works. Address byte with mark, data with space, PARMRK on the receive side. Indicators 1, 2 and 4 answered first try, number…

  5. Réponses à Lire un bus multipoint 9 bits via une passerelle Pi : l'UART peut-elle vraiment le faire ?

    Once a second per indicator is plenty. David, the 9th bit tells every node "this byte is an address, wake up and check if…

  6. Ouverts Lire un bus multipoint 9 bits via une passerelle Pi : l'UART peut-elle vraiment le faire ?

    Food and beverage plant, old filling line. Four weighing indicators talk on a proprietary RS-485 multidrop bus from the 90s: 9600 baud, 9 data…

  7. Réponses à SX1276 en mode FSK : à quoi servent AFC, AGC, RSSI et FEI, et pourquoi mes liaisons échouent les matins froids

    TCXO modules exist for exactly this if a probe still misbehaves.

  8. Réponses à Serhat, les schémas SCADA et le terrain en dessous

    Food plant automation guy here, glad there's someone to ask about drawings. I'll have questions about showing valve states soon.