Respondidos Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

Thanks, the explanation helped me write it up for my manager. Batched to one message every 2 minutes with 4 readings and keepalive 90…

hace 2 semanas, 3 días

Respondidos Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

2.4 GHz, 20 MHz channels. The ESP32 can't do 5 GHz anyway.

hace 2 semanas, 4 días

Iniciados Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

IT admin, I look after networks more than sensors. We have 8 ESP32 sensor boxes in an outdoor storage yard, at the edge of…

hace 2 semanas, 5 días

Respondidos Leer el registro de auditoría: quién hizo qué y comprobar que nadie lo editó

We'd rather push high severity events into our SIEM than poll the API. Any hook for that?

hace 3 semanas, 2 días

Respondidos Bare Si4463 radio modules: where are working Arduino examples hiding?

SDN was floating. Tied it through the library pin and init succeeded on the first try. Sender at the tank, receiver on a second…

hace 5 meses

Iniciados Bare Si4463 radio modules: where are working Arduino examples hiding?

Different project from my pigpio question. We have a water tank about 900 m from the building, no power to spare and no cable.…

hace 5 meses

Respondidos Gateway con Pi: "RTNETLINK answers: File exists" en ifup eth0 y caídas de keepalive tras el arranque

Fixed. Interfaces file cleaned, static config in dhcpcd.conf with noipv4ll, rebooted the Pi ten times in a row this morning and the gateway connected…

hace 7 meses, 3 semanas

Respondidos Gateway con Pi: "RTNETLINK answers: File exists" en ifup eth0 y caídas de keepalive tras el arranque

Yes, ifdown says interface eth0 not configured and ifup fails the same way afterwards.

hace 7 meses, 3 semanas