Novedad: el cortafuegos de IA supervisa toda la plataforma y explica cada incidente con palabras sencillas. Vea cómo funciona

si_tyler

si_tyler

@twilson · Se unió el marzo 2026

Recién llegado

System integrator · energy · 15 years in the field

Temas
3
Respuestas
20
Puntos
0
Recién llegado10 puntos para Miembro

Actividad reciente

  1. Respondidos El TI del cliente rechaza cualquier redirección de puertos en la subestación: ¿Edge necesita realmente acceso entrante?

    A VPN is exactly the conversation I'm trying to avoid. Their security team treats any tunnel into their network as a new project with…

  2. Iniciados El TI del cliente rechaza cualquier redirección de puertos en la subestación: ¿Edge necesita realmente acceso entrante?

    Quick sanity check before I go back into a meeting with a utility customer's IT people. Site is a small substation building: 14 Modbus…

  3. Respondidos ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

    +1 to Grace. We lost a week on a site job because of a PCB antenna inside a steel cabinet.

  4. Respondidos Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

    Also those slow clients eat airtime for everyone on that AP. A frame at 1 Mbps occupies the channel for a long time.

  5. Respondidos Uno resets every time my Pi script opens /dev/ttyUSB0

    Easiest fix: don't restart the script. Run it as a systemd service with Restart=always, open the port once and never close it.

  6. Respondidos USBasp en Mac no detecta mis placas ATmega328P: "could not find USB device"

    Adapter it was. System Information showed nothing through my no-name USB-C dongle; through a powered hub it shows "USBasp" and avrdude finds it. Flashed…

  7. Respondidos Night-time bed-exit alert for a care home: which sensor, and how do I only alert between 22:00 and 06:00?

    For the sensor: an FSR strip under the mattress works but needs calibrating per mattress and drifts as the foam ages. Load cells under…

  8. Respondidos Firmware copiado de nuestra planta en EE. UU., los dispositivos de la planta en Reino Unido dan "bad username or password"

    Good catch. Worth putting the host in a config file instead of the build, so the next plant doesn't copy a hardcoded host.