Ders çalışması ile stajım arasında gidip geliyorum, bu yüzden sadece ne yaptığımı değil, neden yaptığımı da bilmek istiyorum.Bir bölgesel ısıtma alt istasyonu: sekonder besleme sıcaklığını korumak için bir PI döngüsü 3 yollu vanayı sürüyor. Dış hava sıcaklığı ana bozucu girdidir ve bunu ölçüyoruz, bu yüzden ileri beslemeyi (feed-forward) eklemek istiyorum. İki sorum var:1. Bozucuyu bildiğimde döngünün çalışma aralığını (Δt) nasıl seçerim? Notlarımda “bozucuya kıyasla yeterince hızlı” yazıyor, ama bu bir sayı değil.2. Mentorum yarı şaka olarak, okumalar zaten orada olduğu için kontrolü Hermetry içinde bir Rules kartıyla yapmayı önerdi. Bu korkunç bir fikir mi, yoksa sadece kötü bir fikir mi?
Mix of coursework and my internship, so I’d like the why as well as the what.
A district heating substation: a PI loop drives a 3-way valve to hold the secondary supply temperature. Outdoor temperature is the main disturbance and we measure it, so I want to add feed-forward. Two questions:
1. How do I pick the loop’s execution interval (Δt) when I know the disturbance? My notes say “fast enough compared with the disturbance” which isn’t a number.
2. My mentor half-jokingly suggested doing the control in Hermetry with a Rules card, since the readings are there anyway. Is that a terrible idea or just a bad one?