Eine Mischung aus Studienarbeit und meinem Praktikum, deshalb möchte ich sowohl das Warum als auch das Was verstehen.Eine Fernwärme-Übergabestation: Ein PI-Regler steuert ein 3-Wege-Ventil, um die Sekundärvorlauftemperatur zu halten. Die Außentemperatur ist die wichtigste Störgröße und wir messen sie, deshalb möchte ich eine Störgrößenaufschaltung (Feed-Forward) hinzufügen. Zwei Fragen:1. Wie wähle ich das Ausführungsintervall (Δt) des Reglers, wenn ich die Störgröße kenne? In meinen Notizen steht „schnell genug im Vergleich zur Störung“, das ist aber keine Zahl.2. Mein Betreuer hat halb im Scherz vorgeschlagen, die Regelung in Hermetry mit einer Rules-Karte umzusetzen, da die Messwerte ohnehin vorhanden sind. Ist das eine schreckliche Idee oder nur eine schlechte?
Mix of coursework and my internship, so I’d like the why as well as the what.
A district heating substation: a PI loop drives a 3-way valve to hold the secondary supply temperature. Outdoor temperature is the main disturbance and we measure it, so I want to add feed-forward. Two questions:
1. How do I pick the loop’s execution interval (Δt) when I know the disturbance? My notes say „fast enough compared with the disturbance“ which isn’t a number.
2. My mentor half-jokingly suggested doing the control in Hermetry with a Rules card, since the readings are there anyway. Is that a terrible idea or just a bad one?