Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

si_tyler

@twilson · Membre depuis mars 2026

Nouveau

System integrator · energy · 15 years in the field

Sujets
3
Réponses
21
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Réponses à Les alarmes de niveau des essuie-mains se déclenchent à chaque fois que quelqu'un tire une feuille

    For the morning-only idea, a Rules card with a time window can tell people instead of the alarm itself. Separate thread if you get…

  2. Réponses à L'IT du client refuse toute redirection de port à la sous-station : Edge a-t-il vraiment besoin d'un accès entrant ?

    A VPN is exactly the conversation I'm trying to avoid. Their security team treats any tunnel into their network as a new project with…

  3. Ouverts L'IT du client refuse toute redirection de port à la sous-station : Edge a-t-il vraiment besoin d'un accès entrant ?

    Quick sanity check before I go back into a meeting with a utility customer's IT people. Site is a small substation building: 14 Modbus…

  4. Réponses à ESP32-WROOM vs WROVER vs MINI : que signifient les noms des modules et lequel dois-je acheter ?

    +1 to Grace. We lost a week on a site job because of a PCB antenna inside a steel cabinet.

  5. Réponses à Capteurs en extérieur à la limite du Wi-Fi : pourquoi cela ralentit-il autant, et que faire ?

    Also those slow clients eat airtime for everyone on that AP. A frame at 1 Mbps occupies the channel for a long time.

  6. Réponses à La Uno se réinitialise à chaque ouverture de /dev/ttyUSB0 par mon script Pi

    Easiest fix: don't restart the script. Run it as a systemd service with Restart=always, open the port once and never close it.

  7. Réponses à USBasp sur Mac ne détecte pas mes cartes ATmega328P : "could not find USB device"

    Adapter it was. System Information showed nothing through my no-name USB-C dongle; through a powered hub it shows "USBasp" and avrdude finds it. Flashed…

  8. Réponses à Alerte de sortie de lit de nuit pour une maison de retraite : quel capteur, et comment n'alerter qu'entre 22h00 et 06h00 ?

    For the sensor: an FSR strip under the mattress works but needs calibrating per mattress and drifts as the foam ages. Load cells under…