owenn93
@owennguyen · Membre depuis juillet 2026
Engineering student · university · new to IoT
- Sujets
- 2
- Réponses
- 6
- Points
- 0
Activité récente
-
Réponses à Uno avec un adaptateur 12 V et USB en même temps : cela va-t-il griller mon portable ?
It was the diode. Put a 1N4007 on the valve and moved the relay to its own 5 V supply. The COM port hasn't…
-
Réponses à Uno avec un adaptateur 12 V et USB en même temps : cela va-t-il griller mon portable ?
Relay module VCC is on the Uno's 5V pin. Valve is 12 V through the relay contact, from the same adapter. Everything shares one…
-
Ouverts Uno avec un adaptateur 12 V et USB en même temps : cela va-t-il griller mon portable ?
hi, first year student, so sorry if this is obvious. I have an Uno reading a capacitive soil moisture sensor on A0 and switching…
-
Réponses à Eight meters on 30 m of RS-485 at 9600 baud: do I need termination, or is it something else?
Added 680 ohm bias at the Pi end and swapped to a proper twisted pair with a ground wire. 24 hours without a single…
-
Ouverts Eight meters on 30 m of RS-485 at 9600 baud: do I need termination, or is it something else?
Student here, first time with RS-485, so sorry for basic questions.Our lab has eight small Modbus RTU energy meters on one RS-485 line, about…
-
Réponses à Switching Wi-Fi bulbs from a board Switch through my Pi, no vendor app
Why does it have to be a catalog command, couldn't the board send anything?
-
Réponses à L'appel Python à l'endpoint des dernières valeurs bloque pendant deux minutes sur notre Pi
Could it be the API key's IP allowlist blocking you sometimes?
-
Réponses à HC-05 vs HC-06 vs HM-10 for an Uno that has to reach a Pi gateway six metres away
Following, I have exactly the same confusion.

