davidp11
@david-patel · Membre depuis mars 2025
Facility manager · hospitality · new to IoT
- Sujets
- 8
- Réponses
- 62
- Points
- 0
Activité récente
-
Réponses à Sensors on campus lamp posts with no wiring, can we power them wirelessly?
OK so batteries. Does Hermetry City handle that or do I need something else?
-
Réponses à Eight meters on 30 m of RS-485 at 9600 baud: do I need termination, or is it something else?
Does cable length really matter at only 9600 baud?
-
How do the night staff work, one person on a fixed station or walking around? That changes what kind of alert makes sense.
-
Réponses à Lire un bus multipoint 9 bits via une passerelle Pi : l'UART peut-elle vraiment le faire ?
What's the 9th bit for exactly? I've only ever seen 8N1.
-
Réponses à L'appel Python à l'endpoint des dernières valeurs bloque pendant deux minutes sur notre Pi
Had exactly this at one of our properties after the ISP turned IPv6 on. The Pi gets an IPv6 address, tries it first, the…
-
Réponses à SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings
Is this the same radio as LoRa? I thought the RFM95 was LoRa only.
-
Can't you just put the antenna higher?
-
Réponses à Uno as an I2C slave sending floats to a Mega and taking commands back: values come out garbled
Maybe you need pull-up resistors on SDA and SCL? I read I2C needs them.

