La carga en ESP32-CAM indica que no hay programadores disponibles para esta placa
Traducido del English por IA ·
Estoy probando algo por mi cuenta en la planta: una ESP32-CAM apuntando a la entrada de la llenadora, para enviar una señal de «atasco» a Hermetry cuando se acumulen botellas. Compré una con un adaptador FTDI.En el IDE de Arduino (2.3) elijo la placa «ESP32 Wrover Module» y luego Sketch > Upload Using Programmer, porque un video decía que así se flashea con FTDI. Me sale:
No programmers available for this board
El menú de programadores está vacío. ¿Qué me he saltado?
Trying something on the side at the plant: an ESP32-CAM pointed at the filler infeed, to send a «jam» flag to Hermetry when bottles pile up. Bought one with an FTDI adapter.
In the Arduino IDE (2.3) I pick the board «ESP32 Wrover Module», then Sketch > Upload Using Programmer, because a video said that’s how you flash with an FTDI. Get:
No programmers available for this board
Programmer menu is empty. What did I miss?
Traducido del English por IA ·
¿Puedes verlo en la vista en vivo de la cámara de Hermetry una vez flasheado? Me había estado preguntando por estos.
Can you watch it in Hermetry’s camera live view once it’s flashed? Been wondering about these.
Traducido del English por IA ·
«Upload Using Programmer» es para placas AVR con un programador ISP. Las placas ESP32 no tienen ninguno, por eso el menú está vacío. Aquí el FTDI es un puerto serie normal, usa el botón Upload habitual.Lo que me funciona siempre con estas placas:
- Placa: AI Thinker ESP32-CAM (está en el paquete esp32).
- FTDI a 5 V en el pin 5V, GND a GND, TX a U0R, RX a U0T.
- Puentea IO0 a GND, pulsa el botón de reset y luego Upload.
- Cuando diga Hard resetting, quita el puente de IO0 y pulsa reset otra vez.
@Michael no. La vista en directo de Hermetry necesita un flujo H.264, y el ESP32-CAM sirve MJPEG, que nunca se reproduce. Para un indicador de atasco da igual, solo envías un número.
«Upload Using Programmer» is for AVR boards with an ISP programmer. ESP32 boards don’t have any, so the menu is empty. The FTDI is a plain serial port here, use the normal Upload button.
What works for me every time with these boards:
- Board: AI Thinker ESP32-CAM (it’s in the esp32 package).
- FTDI at 5 V to the 5V pin, GND to GND, TX to U0R, RX to U0T.
- Bridge IO0 to GND, press the reset button, then Upload.
- When it says Hard resetting, remove the IO0 bridge and press reset again.
@Michael no. Live view in Hermetry needs an H.264 stream, and the ESP32-CAM serves MJPEG, which is never played. For a jam flag that’s fine anyway, you only send a number.
Traducido del English por IA ·
Carga normal con IO0 puenteado, y se flasheó a la primera. Envío jam como 0/1 en lugar de true/false para que se muestre en el gráfico. Gracias.
Normal Upload with IO0 bridged and it flashed first time. I’m sending jam as 0/1 rather than true/false so it charts. Thank you.
Traducido del English por IA ·
Una pena lo de MJPEG, pero tiene sentido, gracias Aoife.
Shame about MJPEG but makes sense, thanks Aoife.
- Debes estar registrado para responder a este debate.
Únete a la conversación
Inicia sesión para preguntar y responder, dar me gusta a las publicaciones útiles y marcar la respuesta que resolvió tu problema. Cada aportación suma puntos y niveles.

