owenn93
@owennguyen · Se unió el julio 2026
Engineering student · university · new to IoT
- Temas
- 2
- Respuestas
- 6
- Puntos
- 0
Actividad reciente
-
Respondidos Uno con un adaptador de 12 V y USB a la vez: ¿me va a freír el portátil?
It was the diode. Put a 1N4007 on the valve and moved the relay to its own 5 V supply. The COM port hasn't…
-
Respondidos Uno con un adaptador de 12 V y USB a la vez: ¿me va a freír el portátil?
Relay module VCC is on the Uno's 5V pin. Valve is 12 V through the relay contact, from the same adapter. Everything shares one…
-
Iniciados Uno con un adaptador de 12 V y USB a la vez: ¿me va a freír el portátil?
hi, first year student, so sorry if this is obvious. I have an Uno reading a capacitive soil moisture sensor on A0 and switching…
-
Respondidos Ocho medidores en 30 m de RS-485 a 9600 baudios: ¿necesito terminación o es otra cosa?
Added 680 ohm bias at the Pi end and swapped to a proper twisted pair with a ground wire. 24 hours without a single…
-
Iniciados Ocho medidores en 30 m de RS-485 a 9600 baudios: ¿necesito terminación o es otra cosa?
Student here, first time with RS-485, so sorry for basic questions.Our lab has eight small Modbus RTU energy meters on one RS-485 line, about…
-
Respondidos Cambiar bombillas Wi-Fi desde un Switch de la placa a través de mi Pi, sin app del fabricante
Why does it have to be a catalog command, couldn't the board send anything?
-
Respondidos La llamada en Python al endpoint de últimos valores se cuelga dos minutos en nuestra Pi
Could it be the API key's IP allowlist blocking you sometimes?
-
Respondidos HC-05 vs HC-06 vs HM-10 para un Uno que tiene que llegar a una pasarela Pi a seis metros
Following, I have exactly the same confusion.

