owenn93
@owennguyen · Mitglied seit Juli 2026
Engineering student · university · new to IoT
- Themen
- 2
- Antworten
- 6
- Punkte
- 0
Letzte Aktivität
-
Geantwortet auf Uno mit 12-V-Netzteil und USB gleichzeitig: Brennt mein Laptop durch?
It was the diode. Put a 1N4007 on the valve and moved the relay to its own 5 V supply. The COM port hasn't…
-
Geantwortet auf Uno mit 12-V-Netzteil und USB gleichzeitig: Brennt mein Laptop durch?
Relay module VCC is on the Uno's 5V pin. Valve is 12 V through the relay contact, from the same adapter. Everything shares one…
-
Gestartet Uno mit 12-V-Netzteil und USB gleichzeitig: Brennt mein Laptop durch?
hi, first year student, so sorry if this is obvious. I have an Uno reading a capacitive soil moisture sensor on A0 and switching…
-
Geantwortet auf Acht Zähler an 30 m RS-485 mit 9600 Baud: Brauche ich Abschlusswiderstände, oder liegt es an etwas anderem?
Added 680 ohm bias at the Pi end and swapped to a proper twisted pair with a ground wire. 24 hours without a single…
-
Student here, first time with RS-485, so sorry for basic questions.Our lab has eight small Modbus RTU energy meters on one RS-485 line, about…
-
Geantwortet auf Wi-Fi-Lampen über einen Pi mit einem Board-Switch schalten, ohne Hersteller-App
Why does it have to be a catalog command, couldn't the board send anything?
-
Geantwortet auf Python-Aufruf des Endpunkts für die neuesten Werte hängt auf unserem Pi zwei Minuten
Could it be the API key's IP allowlist blocking you sometimes?
-
Geantwortet auf HC-05 vs. HC-06 vs. HM-10 für einen Uno, der ein Pi-Gateway sechs Meter entfernt erreichen muss
Following, I have exactly the same confusion.

