Respondidos Leer la pestaña Log de un dispositivo: conexiones, desconexiones y tomas de sesión

Mine has no connect rows at all, only changes. The device is an SNMP box.

hace 2 días, 11 horas

Respondidos ¿ESP8266 como broker MQTT local para que los sensores sigan funcionando cuando se cae internet?

uMQTTBroker works, I ran it for a while. No TLS, and it fell over at about 8 clients for me.

hace 2 semanas, 1 día

Respondidos Two Unos over a pair of HC-05s so the one with the GSM modem reports both

Fast blink means not connected. Once they link you get two quick blinks every couple of seconds.

hace 2 semanas, 2 días

Respondidos ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

I use a DevKitC board with a WROOM-32E on it for everything at home, plug in USB and go.

hace 2 semanas, 3 días

Respondidos La forma más barata de enviar datos desde mi taller con una placa alimentada por PoE

Hermetry doesn't care, it only sees a TLS connection on 8883 (or HTTPS on 443). Ethernet or WiFi is invisible to it. For one…

hace 2 semanas, 6 días

Respondidos Freezer at -12.5 C shows up as 65411 after going through my Modbus slave

Same goes for 32-bit values split over two registers, then you also have to get the word order right. Fun times.

hace 3 semanas

Respondidos La consola serie de mi pasarela Pi muestra códigos de escape en lugar de colores y htop es un desastre

TERM was vt220, exactly. With the bashrc block it's colours and a full-width htop over serial now. I also added Eric's tip, the service…

hace 4 semanas

Respondidos La consola serie de mi pasarela Pi muestra códigos de escape en lugar de colores y htop es un desastre

Same thing in picocom from my Linux box, I tried.

hace 4 semanas, 1 día