carlosc76
@clark-c · Mitglied seit März 2026
System integrator · energy
- Themen
- 7
- Antworten
- 17
- Punkte
- 0
Erstellte Forenantworten
Von English mit KI übersetzt ·
Ein KLF 200 bestellt, alle 14 an einem Nachmittag gekoppelt (der Schritt „Produkt hinzufügen“ auf jedem Handsender ist fummelig, man muss ihn ganz nah ans Gerät halten). pyvlx findet sie alle, die Positionen kommen in Hermetry als win01.pos bis win14.pos an, und der Regenkontakt schließt alles in etwa 40 s. Musste vorher die Firmware der Box aktualisieren, genau wie du geschrieben hast, ohne Update hat sie die Verbindung verweigert. Danke!
Ordered a KLF 200, paired all 14 in an afternoon (the „add product“ step from each keypad is fiddly, you have to hold it right up close). pyvlx sees them, positions arrive in Hermetry as win01.pos to win14.pos and the rain contact closes everything in about 40 s. Had to update the box firmware first exactly as you said, out of the box it refused the connection. Cheers.
Von English mit KI übersetzt ·
Am Freitag habe ich eine für ein Kundenportal eingerichtet. Die DNS-Verifizierung hat beim ersten Versuch funktioniert, und etwa zehn Minuten später zeigte die Force-SSL-Prüfung SSL Active an. Der Timeline-Tab der Domain war nützlich, um dem Kunden zu zeigen, was wann passiert ist; so etwas schätzen sie.
Set one up for a customer portal on Friday. Verify DNS went through on the first try and Force SSL check showed SSL Active roughly ten minutes later. The Timeline tab on the domain was useful to show the customer what happened when, they like that sort of thing.
Von English mit KI übersetzt ·
Ja, Rückmeldung ist genau der Sinn des Dashboards. Die Tastaturen sind vom Typ 3UK, falls das relevant ist. Die Fenster wurden 2021 installiert.
Yeah feedback is the whole point for the dashboard. The keypads are the 3UK type if that matters. Windows were installed 2021.
Von English mit KI übersetzt ·
Wie weit zurück reicht der Reiter Log? Einer unserer Standorte fällt an ein paar Nächten pro Woche aus, und ich möchte das mit den eigenen Logs des Routers abgleichen.
How far back does the Log tab go? One of our sites drops off a couple of nights a week and I want to line it up with the router’s own logs.
Von English mit KI übersetzt ·
Laufen die APs für diese Clients auf 2,4 oder 5 GHz? 5 GHz wird durch die Hindernisse auf dem Gelände deutlich schneller gedämpft.
Are the APs on 2.4 or 5 GHz for those clients? 5 GHz dies much faster through the yard clutter.
Von English mit KI übersetzt ·
Kann die Bandanimation der realen Liniengeschwindigkeit folgen? Unsere Antriebe melden die Geschwindigkeit in Hz, nicht in Prozent.
Can the belt animation follow the real line speed? Our drives report speed in Hz, not percent.
Von English mit KI übersetzt ·
Erster Testflug durchgeführt. Die Live-Markierung bewegt sich, und die Wiedergabe nach der Landung zeigte genau, welche Zeilen wir abgedeckt haben; der Kunde war begeistert von der Scrubbing-Funktion. Zunächst hatte ich lat/lon als Schlüssel verwendet, und die Karte meldete „Keine Zeilen mit gültigen Koordinaten“; nach dem Umbenennen in lng erschien sie.
Worked on the first test flight. Live marker moves, and the replay after landing showed exactly which rows we covered, the client loved the scrubbing. Had lat/lon as the key at first and the map said „No rows with valid coordinates“, renamed to lng and it appeared.
Von English mit KI übersetzt ·
TELEM2 ist frei, der Pi hängt bereits mit 921600 daran für das Videotool. Und ja, wir haben die Genehmigungen für die Standorte, die wir anfliegen.
TELEM2 is free, the Pi is already on it at 921600 for the video tool. And yes, we have the permissions for the sites we fly.
Von English mit KI übersetzt ·
Ich glaube nicht, dass Alarmregeln Telefonnummern akzeptieren. Als wir unsere eingerichtet haben, funktionierte SMS nur über den Notify-Block eines Flows, dort kann man eine Telefonnummer angeben.
I don’t think alarm rules take phone numbers. When I set ours up, SMS only worked from a flow’s Notify block, where you can name a phone number.
Von English mit KI übersetzt ·
Danke Aoife, genau diese Struktur hat mir gefehlt, besonders der Klemmenplan als eigenes Blatt. Unser Standardpanel in QElectroTech neu gezeichnet (danke Brian) mit -X1/-X2 und einem Klemmenplan pro Klemmleiste. Die erste Kundenprüfung kam mit einer Frage statt zehn zurück.
Thanks Aoife, that’s the structure I was missing, especially the terminal plan as a separate sheet. Redrew our standard panel in QElectroTech (thanks Brian) with -X1/-X2 and a terminal plan per strip. First customer review came back with one question instead of ten.
Von English mit KI übersetzt ·
Den Subunternehmer zurück an den Zeichentisch geschickt. Wir nehmen ein lizenziertes Gateway für die Wechselrichter-Busse und ein kleines Pi-Gateway für die Wetter-Funkstrecke und die 433-MHz-Sonden, da das ausgewählte Gateway-Modell dafür keinen Eingang hat. Twilson, die Wechselrichter unterstützen SunSpec, das hat den Registeraufwand halbiert.
Sent the subcontractor back to the drawing board. We’re going with a licensed gateway on the inverter buses, and a small Pi gateway for the weather radio and the 433 MHz probes since the gateway model we picked has no input for those. Twilson, the inverters do SunSpec, that halved the register work.
Von English mit KI übersetzt ·
Das können Sie heute schon mit einem Flow umsetzen; ich habe für einen Kessel mit einer Lastprognose etwas Ähnliches gemacht.Lassen Sie den Pi die Modellausgabe als Telemetrie des Ofengeräts senden: {"pred_load_c": 41.0, "pred_conf": 0.83}. Fügen Sie im Root-Flow des Geräts (oder im Profil-Root für das Ofenprofil) nach Save telemetry einen Script-Block, der den Offset berechnet, und einen Send-command-Block hinzu, der ihn sendet. Der Script-Block:
const p = msg.payload;
if (p.pred_load_c === undefined) return null;
const w = Math.min(Math.max((p.pred_conf - 0.5) / 0.4, 0), 1); // 0 below 0.5, 1 above 0.9
const deficit = 850 - p.pred_load_c; // target minus load temp
msg.payload = { offset_c: Math.round(Math.min(deficit * 0.02 * w, 15) * 10) / 10 };
return msg;
Dann Send command mit einem Katalogbefehl wie furnace.set_ff_offset und den Parametern msg.payload. Der Befehl geht an das Gerät der Nachricht, also den Pi des Ofens.Behalten Sie die Begrenzung (hier 15 °C) bei und lassen Sie den Pi alles ablehnen, was außerhalb seiner eigenen Grenzen liegt. Zu kstewarts Bedenken: Der PID bleibt auf dem Pi oder dem Regler; die Cloud schlägt nur einen Offset vor, und der Pi sollte ihn nach einigen Minuten ohne neuen Wert wieder auf 0 setzen.Achten Sie auf Ihren Tarif: Jeder Script-Block in einem bereitgestellten Flow zählt auf Ihr Limit für Script-Blöcke, und beim Deployment eines Flows mit Script müssen Sie den Namen des Flows eintippen.
You can do it today with a flow, I did something similar for a boiler with a load forecast.
Have the Pi send the model output as telemetry of the furnace device: {"pred_load_c": 41.0, "pred_conf": 0.83}. In the device’s root flow (or a profile root for the furnace profile), after Save telemetry, add a Script block that computes the offset and a Send command block that sends it. The Script block:
const p = msg.payload;
if (p.pred_load_c === undefined) return null;
const w = Math.min(Math.max((p.pred_conf - 0.5) / 0.4, 0), 1); // 0 below 0.5, 1 above 0.9
const deficit = 850 - p.pred_load_c; // target minus load temp
msg.payload = { offset_c: Math.round(Math.min(deficit * 0.02 * w, 15) * 10) / 10 };
return msg;
Then Send command with a catalog command like furnace.set_ff_offset and params msg.payload. The command goes to the message’s device, which is the furnace’s Pi.
Keep the clamp (15 °C here) and let the Pi refuse anything outside its own limits. For kstewart’s worry: the PID stays on the Pi or the controller; the cloud only suggests an offset, and the Pi should drop it back to 0 after a few minutes without a fresh one.
Mind the plan: each Script block in a deployed flow counts toward your Script blocks limit, and a deploy with a script asks you to type the flow’s name.
Von English mit KI übersetzt ·
Ports wieder auf Auto, EEE blieb aus, Reset-Impuls ergänzt: Fünf von sechs sind hochgekommen und senden seit Dienstag. Der letzte wollte das nicht, daher bekam er einen kleinen 10/100-Switch in sein Gehäuse. Alle sechs werden beim nächsten Vor-Ort-Termin durch W5500 ersetzt.
Ports back to auto, EEE stayed off, reset pulse added: five of six came up and have been publishing since Tuesday. The last one would not have it, so it got a small 10/100 switch in its box. Replacing all six with W5500s at the next site visit.
Von English mit KI übersetzt ·
Habe EEE auf allen sechs Ports deaktiviert. Dann habe ich die Ports zusätzlich auf 100/Full fest eingestellt. Jetzt leuchtet die Link-LED, aber es gibt keinen Datenverkehr, DHCP bekommt nie eine Antwort.
Turned EEE off on all six ports. Then I also forced the ports to 100/full. Now the link LED comes on, but there is no traffic, DHCP never gets an answer.
Von English mit KI übersetzt ·
Bei mir genauso. City, Safe und Forge haben keine Seiten in der Dokumentation, deshalb habe ich bei meinem letzten Beleuchtungsprojekt den Umfang nur aus den dokumentierten Teilen abgeleitet: LoRaWAN, Alarmregeln, Boards. Frag deinen Ansprechpartner beim Anbieter nach City, falls der Kunde den Namen im Projekt haben möchte, aber warte für ein Pilotprojekt im März nicht auf diese Antwort.
Same here. City, Safe and Forge have no pages in the docs, so for my last lighting job I scoped everything from the parts that are documented: LoRaWAN, alarm rules, boards. Ask your account contact about City if the client wants the name on it, but don’t wait on that answer for a March pilot.

