maker_wei
@king-w · Ekim 2026 tarihinde katıldı
Maker · home automation · Wellington · new to IoT
- Konular
- 2
- Yanıtlar
- 6
- Puan
- 0
Son etkinlik
-
Yanıtlanan Zigbee sıcaklık sensörlerini bir Pi üzerinden Hermetry'ye ayrı cihazlar olarak almak
Did you have to flash the dongle firmware first? I bought the same one and I'm stuck at that step.
-
Yanıtlanan 2.2.0: Gösterge panellerinde IoT veri kaynakları, canlı güncellemelerle
fixed in the sketch (was using String() on everything), chart is filling up now. the old points stay missing but I can live with…
-
Yanıtlanan 2.2.0: Gösterge panellerinde IoT veri kaynakları, canlı güncellemelerle
My line chart stays empty but the stat card next to it shows the temperature fine. Same device, same key. The device sends this:…
-
Yanıtlanan PoE ile beslenen bir kartı atölyemden veri göndermek için en ucuz yol
update: ordered the POE-ISO, it came Thursday. Took me a while because I had the IP of the broker in setServer from a ping…
-
Yanıtlanan PoE ile beslenen bir kartı atölyemden veri göndermek için en ucuz yol
yeah that was my question too. My switch is a TL-SG1005P so 802.3af I think. Tyler's option looks fiddly for me tbh, I'd rather…
-
Başlatılan PoE ile beslenen bir kartı atölyemden veri göndermek için en ucuz yol
ok so total beginner here, be gentle. I have a detached workshop/barn about 40 m from the house with a Cat6 run already in…
-
Yanıtlanan Yeni Zelanda'dan tam acemi, atölye sensörleri
Ha, will do. Trying the laptop thing this weekend.
-
Başlatılan Yeni Zelanda'dan tam acemi, atölye sensörleri
Hi all, Wei from New Zealand. Complete beginner. I've got a workshop out the back with no decent WiFi but a Cat6 cable already…

