Ordering LTE antennas for a batch of gateways. The modem datasheet says “IPEX connector” for main, diversity and GNSS. My usual supplier only lists U.FL pigtails. Are those the same thing under two names? I don’t want 40 pigtails that don’t fit.
Same thing, different brand names.
careful, my LTE module had MHF4 on it and U.FL didn’t fit at all
Both of them are partly right. U.FL is Hirose’s name. IPEX makes a family called MHF, and the original MHF (sometimes MHF1 or MHF I) mates with U.FL, so those pigtails are interchangeable. MHF4 is a smaller connector (about the size of a W.FL) and does not mate with U.FL at all, which is what Aisha hit. Newer LTE modules use MHF4 a lot to save space, sometimes only on the main antenna.
So check the mechanical drawing of the modem, not the word “IPEX”. Height around 2.5 mm is MHF1/U.FL, around 1.2 mm is MHF4.
Two other things. These connectors are rated for only about 30 mating cycles, so don’t plug and unplug them for every test. And keep pigtails short: the thin 1.13 mm cable loses a fair bit at LTE frequencies, a 30 cm pigtail where 10 cm would do costs you signal.
Drawing says MHF4 for main and diversity and MHF1 for GNSS. Glad I asked. Ordered MHF4 pigtails for the LTE ones, U.FL for GNSS, 10 cm each.
- Bu konuyu yanıtlamak için giriş yapmış olmalısınız.
Sohbete katılın
Soru sormak ve yanıtlamak, yararlı gönderileri beğenmek ve sorununuzu çözen yanıtı işaretlemek için oturum açın. Her katkı puan ve seviye kazandırır.