wilsonmaker
@wilson-m · Temmuz 2025 tarihinde katıldı
Maker · home automation · Nottingham · new to IoT
- Konular
- 14
- Yanıtlar
- 70
- Puan
- 0
Son etkinlik
-
I tried exactly the uMQTTBroker thing at home last year and gave up on it, then did this, which has been solid for 8…
-
Yanıtlanan Python betiğim /dev/ttyUSB0 dosyasını açtığında Uno sıfırlanıyor
Thanks James. -hupcl alone wasn't enough, the first open after a reboot still reset it, like you said. Put the 10 µF cap on…
-
Yanıtlanan Switching Wi-Fi bulbs from a board Switch through my Pi, no vendor app
Working! Got two WiZ bulbs. The command list filled up as soon as I added light.set to the catalog. First version the Switch only…
-
Two buses on GPIO4 and GPIO17, 2.2k each, and I re-did the run as a line along the racks. 20 of 20 for two…
-
Yanıtlanan Uno as an I2C slave sending floats to a Mega and taking commands back: values come out garbled
Works first time, which never happens to me. Readings are clean and the valve opens when the Mega sends 1. I'd been sending text…
-
Başlatılan Python betiğim /dev/ttyUSB0 dosyasını açtığında Uno sıfırlanıyor
Bit of a beginner so sorry if this is obvious. I have an Arduino Uno clone (CH340 chip) plugged into a Raspberry Pi with…
-
3 wires, 3.3V from the Pi. Legs are 30 cm to 1 m, it's more of a star than a line I guess.
-
On my desktop Pi a little lightning bolt shows up in the corner when the supply is bad, so it definitely knows somehow.

