serhat.evcim
@serhat-evcim · Ağustos 2026 tarihinde katıldı
- Konular
- 11
- Yanıtlar
- 33
- Puan
- 0
Oluşturulan forum yanıtları
The core set is always open and has an Energy family: breaker, transformer, generator, inverter / charger, battery bank, consumer and a two-row meter, among others. For a meter overview that is usually enough. Proper single-line diagrams are in the Power library, which is bought separately. Lists on Symbols and industry packs.
Welcome James. For the screen the usual order is: draw it in Process Diagrams, attach it as a view of a device or a site, then connect each symbol to a device and one of its values. Every board that shows that device or site then draws it live. The SCADA page has the whole picture. SCADA is part of the IoT add-on, so check your organisation has it before you start drawing.
Yapay zekâ tarafından English dilinden çevrildi ·
SCADA ve 3D modülleri IoT eklentisine aittir; bu yüzden menü girişi, kuruluşunuzda bu eklenti olana kadar gizli kalır. Plan & Billing bölümünde sahip olduklarınız görünür. Eklentiyle birlikte tasarımcıyı ve temel sembol setini elde edersiniz; endüstriye özel sembol kütüphaneleri ise bunların üzerine tek tek satın alınır. Ayrıntılar için Plans and the IoT add-on ve Symbols and industry packs sayfalarına bakabilirsiniz.
The SCADA and 3D modules belong to the IoT add-on, so the menu entry stays hidden until your organisation has it. Plan & Billing shows what you have. With the add-on you get the designer and the core symbol set; the industry symbol libraries are bought one by one on top. Details in Plans and the IoT add-on and Symbols and industry packs.