Yeni: Yapay zekâ güvenlik duvarı tüm platformu izliyor ve her olayı sade bir dille açıklıyor. Nasıl çalıştığını görün

Olivia D.

oliviad55

@olivia-davis · Mart 2026 tarihinde katıldı

Yeni üye

System integrator · buildings · 6 years in the field

Konular
1
Yanıtlar
8
Puan
0
Yeni üye10 için Üye puan

Son etkinlik

  1. Yanıtlanan Haritadaki siteler: bir site, yedi cihaz, en kötü alarmına göre renklendirilmiş

    Is this the same colour as the Status badge on a Sites board? On ours they don't always agree.

  2. Yanıtlanan Küçük bir veri merkezi demosu için bir site paneli: bir site, Uyarı, dört açık alarm

    The "place but no site" card is handy. We onboard sensors in batches and a few always end up placed but not under any…

  3. Yanıtlanan 2.2.1: Tek tıklamayla 2D süreç çiziminden oluşturulan 3D görünüm

    Found it, worked. Two of our dosing pumps came out as labelled boxes though.

  4. Yanıtlanan 2.2.1: Tek tıklamayla 2D süreç çiziminden oluşturulan 3D görünüm

    Where is the button? Looked in Process Diagrams and in the 3D Designs list and found nothing.

  5. Yanıtlanan RS-485 üzerindeki invertörler ve seri radyolu sensörler: IP'siz cihazları Hermetry'ye ne taşır?

    A variant for sensor networks without TCP, it needs its own gateway to turn it into normal MQTT anyway.

  6. Yanıtlanan Bir Zigbee radyo modülü neden bir ESP32'nin beş katı fiyatında?

    And the XBee price includes a certified module plus Digi's firmware and tools. You're paying them so you don't do RF certification yourself.

  7. Yanıtlanan STM32 ana MCU için OTA, yanındaki ESP32 MQTT trafiğini yürüten taraf olduğunda

    The device asks for fw_url again (an attribute request) and gets a fresh one, then resumes from the byte it had with Range. We've…

  8. Yanıtlanan STM32 ana MCU için OTA, yanındaki ESP32 MQTT trafiğini yürüten taraf olduğunda

    We did exactly this on building controllers (STM32 plus an ESP32 modem). Hermetry doesn't care which chip ends up running the image, it only…