jason_fw
@jasonwhite18 · Nisan 2025 tarihinde katıldı
Embedded developer · logistics
- Konular
- 10
- Yanıtlar
- 48
- Puan
- 0
Oluşturulan forum yanıtları
Yapay zekâ tarafından English dilinden çevrildi ·
AX55 ağ başına güvenlik duvarı kuralları ayarlamanıza izin veriyor mu, yoksa yalnızca misafir ağı açma/kapama izolasyon anahtarı mı var?
Does the AX55 let you set firewall rules per network, or only the guest on/off isolation switch?
Worth putting the versions in a requirements.txt next to the script so the next upgrade doesn’t surprise anyone.
The shield is for Uno-shaped boards, the ESP32 DevKit doesn’t plug in.
Yapay zekâ tarafından English dilinden çevrildi ·
Ne yaparsanız yapın, mikro anahtarın sıçramasını (debounce) önleyin. Bir teneke kutu bir oluktan aşağı zıplayarak size 3 sayım verebilir.
Whatever you do, debounce the microswitch. A can bouncing down a chute will give you 3 counts.
Which paho version is on there now? pip show paho-mqtt
Lab confirmed by email: application updates within the grant are fine, they added a note to our file. First wave of 10 went through yesterday on LTE (allowed only for those 10). One failed with a signature error because our build script signed the debug image, bootloader refused it as it should. That alone made the setup worth it.
Only our application on the host MCU, the modem firmware is the vendor’s and we don’t touch TX power or bands. Antenna is the reference one from the module’s grant.
Yapay zekâ tarafından English dilinden çevrildi ·
Ayrıca ona 5V vermeyin. Veri hattı, beslendiğiniz gerilime çekilir ve Pi’nin GPIO pinleri yalnızca 3.3V’a dayanır.
Also don’t feed it 5V. The data line gets pulled up to whatever you power it from, and the Pi’s GPIO pins are 3.3V only.
Yapay zekâ tarafından English dilinden çevrildi ·
Cihazdaki Bağlantı ayrıntıları kartı tam olarak neyi gösteriyor? Ana bilgisayar (host) ve port?
What exactly does the Connection details card on the device show you? Host and port?
Yapay zekâ tarafından English dilinden çevrildi ·
Konumlar arasında GPS ve modem ne yapıyor? İkisi de sürekli açık mı?
What are the GPS and the modem doing between fixes? Both on all the time?
Yapay zekâ tarafından English dilinden çevrildi ·
WPS mi? BOOT tuşunu 3 saniye basılı tutun, router üzerindeki düğmeye basın, tamam. Yıllar önce birkaç depo tarayıcısında bunu yapmıştım.
WPS? Hold BOOT for 3 s, press the button on the router, done. Did that on some warehouse scanners years ago.
PT4115 module in, two bucks each, PWM at 1 kHz into DIM. No more hot resistor and the brightness stays put. Slider works with Ask before running off, level comes back as light.level. Thanks David.
One gotcha with the DS3231 boards: the cheap ones have a charging circuit for the coin cell that you should remove if you use a CR2032.
Rebuilt it as position mode with gate.move open/closed and the drive’s own limits. Did the double click test on purpose, it just goes to open once. Symbol follows the reported position now. Thanks Ciaran, and Aoife, torque mode had me thinking for a minute.
Dimming, the night shift wants it lower. 0 to 100 on the slider.